FUJI PM05EK2 PM05EL2 W040-SW080-S JAW Gripper Jaw for H01 H02 Head in Pick and Place Machine

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW for H01 H02 Head

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is a precision SMT machine spare part designed for FUJI pick and place machine H01 and H02 placement head applications. It is used as a gripping, holding, supporting, and positioning component in the head assembly, helping the placement head handle electronic components more stably during high-speed SMT production. In modern PCB assembly, the placement head must pick components from feeders, transfer them through rapid movement, align them accurately, and place them onto PCB pads with consistent repeatability. During this process, a small mechanical part such as a JAW can directly influence pickup stability, placement accuracy, machine running smoothness, and production yield.

This FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is suitable for SMT factories, EMS manufacturers, PCB assembly plants, machine maintenance teams, SMT repair centers, and spare parts distributors who need reliable replacement parts for FUJI placement head maintenance. The product is mainly related to FUJI H01 and H02 head systems. It is commonly used when the original JAW becomes worn, contaminated, damaged, loose, deformed, or unable to support stable component gripping. Replacing the correct JAW in time can help reduce missing pickup, component drop, head alarm, abnormal gripping, placement deviation, and unexpected production downtime.

Cause

In a high-speed SMT production line, FUJI pick and place machines are required to operate continuously for long hours. The H01 and H02 heads repeat pickup and placement actions thousands or even millions of times during production. Each cycle includes moving to the feeder position, picking or gripping the component, lifting the component, moving through the programmed path, aligning the component, placing it onto the PCB, and returning for the next cycle. The JAW works in this repeated mechanical process and may gradually experience wear, friction, contamination, slight deformation, or reduced gripping stability.

When the JAW is in good condition, the placement head can grip and transfer components smoothly. When the JAW is worn or damaged, the machine may not stop immediately, but the placement result may become unstable. Operators may notice missing components, component shift, abnormal pickup, unstable clamping, repeated head errors, lower mounting accuracy, or poor yield. These problems may appear occasionally at first, but they can become more serious if the JAW is not inspected and replaced in time.

For SMT factories, the cause of unstable pickup is not always easy to identify. It may come from nozzle wear, vacuum leakage, feeder misalignment, bad component packaging, head calibration error, dirty parts, or damaged mechanical components. However, when the JAW is visibly worn, loose, damaged, or not gripping correctly, replacement is often necessary. A small part such as FUJI PM05EK2 PM05EL2 W040-SW080-S JAW can have a direct effect on the stability of the whole placement process.

Another common reason for replacing the JAW is preventive maintenance. Many factories do not wait until the part completely fails. Instead, they inspect key mechanical parts regularly and replace them before serious failure occurs. Preventive replacement helps avoid sudden downtime during urgent production orders. For production lines that run day and night, a planned maintenance schedule is much more efficient than emergency troubleshooting after machine stoppage.

Solution

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW provides a practical replacement solution for FUJI pick and place machine H01 and H02 head maintenance. It is designed for use in the placement head gripping area, supporting stable component handling and smooth head operation. When the old JAW becomes worn, unstable, contaminated, damaged, or unsuitable for normal operation, replacing it with the correct model can help recover better pickup stability and placement performance.

The key value of this product is accurate model matching. In SMT spare parts purchasing, many products look similar but cannot be used interchangeably. If the wrong JAW is installed, the head may not work properly, or the machine may generate new errors. Therefore, the product information PM05EK2 / PM05EL2 and W040-SW080-S should be checked carefully before ordering. Customers should also confirm whether the part is used for H01 or H02 head application.

For SMT maintenance engineers, replacing the correct JAW can be part of a wider repair process. After replacement, engineers may also need to check the nozzle condition, pickup position, component height, feeder alignment, head movement, vision recognition, and placement result. A good spare part helps recover mechanical stability, but complete maintenance may require checking the whole pickup and placement system.

For purchasing teams, this product helps simplify sourcing. The part number and model standard can be used for inquiry, quotation, inventory management, and repeat purchase. Customers can send the required quantity, machine model, head type, and old part photos to receive a more accurate quotation. For distributors, this FUJI JAW can be listed as a FUJI SMT head spare part, FUJI gripper jaw, FUJI H01 head part, FUJI H02 head part, or SMT nozzle-related replacement part.

Specifications

Main Product Features

Although the FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is a small component, it plays an important role in the operation of the placement head. In SMT production, small parts often determine whether the machine can maintain stable accuracy over long working hours. The head must move rapidly and repeatedly, and every gripping action must be consistent. If the JAW cannot provide stable support, the machine may show unstable pickup performance even when other systems are working normally.

The product is especially useful for factories that produce high-volume PCBs, automotive electronics, communication boards, industrial control boards, LED boards, consumer electronics, home appliance control boards, medical electronics, and other electronic products. These factories usually require stable equipment operation and low downtime. Keeping this JAW as a spare part can help maintenance teams respond quickly when gripping-related problems occur.

Application

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is mainly used in FUJI pick and place machine H01 and H02 head systems. It can be applied in SMT production lines where accurate component pickup and placement are required. The part is suitable for daily machine maintenance, emergency repair, preventive spare parts replacement, and spare parts warehouse backup.

In real production, the JAW may be replaced when engineers find pickup instability, mechanical wear, abnormal gripping, component drop, or repeated production defects. The replacement should be performed by trained maintenance personnel according to the machine condition and factory maintenance process. After installation, the machine should be checked to confirm stable operation before mass production continues.

For a factory running several FUJI machines, the same type of spare part may be required repeatedly. Purchasing the correct quantity in advance can help reduce waiting time. If a machine stops because of a small unavailable spare part, the production loss may be much higher than the part cost. Therefore, many production managers prefer to prepare important FUJI head spare parts in inventory.

How It Works

The FUJI PM05EK2 PM05EL2 W040-SW080-S JAW works as part of the placement head mechanism. During SMT production, the pick and place machine receives placement data from the program. The feeder supplies components in the correct position. The head moves to the feeder, picks or grips the component, moves to the PCB position, and places the component onto the solder paste pad. The JAW helps support stable gripping and component transfer during this process.

This process is repeated continuously in every production shift. Because the JAW is involved in repeated mechanical action, long-term wear is normal. When the part becomes worn, the gripping action may become unstable. This may affect pickup success rate, placement accuracy, and production efficiency. Therefore, regular inspection and timely replacement are important.

The JAW does not work alone. It works together with the nozzle system, head mechanism, feeder position, vacuum system, vision system, placement program, and machine calibration. If a production issue occurs, engineers should inspect the complete system. However, when the JAW is confirmed to be worn or damaged, using the correct FUJI PM05EK2 PM05EL2 W040-SW080-S replacement part can help restore normal operation.

How To Choose

Choosing the correct FUJI JAW part is very important. In SMT machine spare parts, many parts have similar appearance but different size, structure, installation position, or application head type. A wrong part may not fit the machine, may cause abnormal movement, or may fail to solve the original production problem. Customers should confirm all available information before ordering.

If customers cannot confirm the exact model, they can send the old JAW photo, machine model, head label, part number label, or parts book information. This helps the supplier check whether PM05EK2 / PM05EL2 W040-SW080-S is the correct item. For overseas orders, this step is especially important because international shipping time and return cost are high.

When choosing the supplier, customers should also consider response speed, product knowledge, packing quality, shipping options, after-sales communication, and ability to supply related FUJI spare parts. A professional SMT spare parts supplier can help customers save time by checking the model before quotation and suggesting related parts when needed.

Comparison Between Normal JAW and Worn JAW

This comparison shows why the condition of the JAW should not be ignored. In high-speed SMT production, the machine depends on stable mechanical parts to achieve accurate placement. A worn JAW may not be obvious from outside at first, but it can create repeated small defects that are difficult to trace. Replacing the part in time can help reduce unstable production problems.

Maintenance Suggestions

To keep the FUJI pick and place machine working smoothly, the JAW should be included in regular maintenance inspection. Engineers can check whether the part is dirty, loose, damaged, worn, or not moving smoothly. The inspection frequency depends on production volume, component type, machine working hours, and factory maintenance standards.

Good maintenance habits can extend machine life and reduce sudden failures. For factories with multiple shifts, it is useful to record part replacement history. This helps engineers understand how often the JAW needs replacement and how many spare parts should be kept in stock.

Product Value for SMT Factories

For SMT factories, the value of FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is not only the part itself, but also the production stability it supports. When the placement head works properly, the machine can maintain better productivity and placement quality. When a small head part fails, the whole line may stop, affecting workers, machines, production plans, and delivery schedules.

For factories producing automotive electronics or high-reliability PCB products, placement quality is especially important. Even a small unstable component may cause functional failure. Therefore, maintaining the placement head in good condition is an important part of quality control.

Product Value for Distributors

This FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is also suitable for SMT spare parts distributors. It can be listed under FUJI SMT parts, FUJI head parts, FUJI JAW, FUJI gripper jaw, FUJI H01 head parts, FUJI H02 head parts, SMT nozzle parts, or SMT machine spare parts. Since many FUJI machine users require head maintenance parts, this product can be a useful item for spare parts catalogs.

For distributors, it is recommended to use keywords such as FUJI PM05EK2 JAW, FUJI PM05EL2 JAW, W040-SW080-S JAW, FUJI H01 Head JAW, FUJI H02 Head JAW, FUJI SMT head parts, FUJI gripper jaw, SMT nozzle parts, and FUJI pick and place machine spare parts. These keywords help improve search coverage and make the product easier for buyers to find.

Related SMT Spare Parts

Customers who purchase FUJI PM05EK2 PM05EL2 W040-SW080-S JAW may also need other FUJI machine spare parts for complete maintenance. Supplying related parts can help customers complete repair work faster and reduce repeated shipping costs.

When customers send an inquiry, they can also provide a spare parts list. This allows us to check multiple items together and offer a more complete supply solution. For factories outside China, combining parts in one shipment can reduce shipping cost and purchasing time.

Quality Control

Quality control is important for SMT spare parts because the parts are used in precision machines. Before shipment, FUJI PM05EK2 PM05EL2 W040-SW080-S JAW can be checked according to order requirements. Inspection may include model confirmation, appearance check, quantity check, packing check, and photo confirmation if needed.

For international buyers, pre-shipment confirmation is very useful. It helps reduce communication problems and avoids wrong products being shipped. If the customer has strict requirements, they should clearly state them before order confirmation.

Packing & Delivery

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is a small precision SMT spare part, so careful packing is necessary. The packing method can be adjusted according to product condition, quantity, shipping method, and customer requirements. Protective packing helps reduce the risk of damage during international transportation.

We can support fast international shipping for urgent repair orders. Customers can choose express delivery when they need the part quickly. For regular spare parts purchasing, customers can also use their own forwarder or combine several items into one shipment.

Why Choose Us

We focus on SMT machine spare parts supply and support customers with FUJI, JUKI, YAMAHA, Samsung/Hanwha,ASM, DEK, MPM, Heller, and other SMT equipment parts. For FUJI machine users, we can supply head parts, nozzle parts, feeder parts, boards, motors, drivers, sensors, valves, cylinders, belts, filters, and other maintenance components.

Our goal is to help customers reduce downtime, improve purchasing efficiency, and get suitable SMT spare parts at the right time. Whether you need one piece for urgent repair or a batch order for spare parts inventory, you can contact us with the product model and required quantity.

SEO Application Description

FUJI PM05EK2 PM05EL2 W040-SW080-S JAW is an important FUJI SMT machine spare part for H01 and H02 head application. It is suitable for FUJI pick and place machine maintenance, SMT production repair, PCB assembly line spare parts replacement, and global SMT spare parts supply. This FUJI JAW helps support stable component gripping, smooth head operation, and accurate placement performance. It is suitable for customers searching for FUJI JAW, FUJI gripper jaw, FUJI H01 head parts, FUJI H02 head parts, FUJI SMT nozzle parts, FUJI pick and place machine parts, FUJI SMT head spare parts, and W040-SW080-S replacement parts.

For independent website upload, this product can be placed under SMT Nozzle, SMT Spare Parts, FUJI SMT Parts, or FUJI Head Parts category. The product title should include FUJI, PM05EK2, PM05EL2, W040-SW080-S, JAW, H01 Head, H02 Head, and pick and place machine. These terms help customers identify the product quickly and improve search matching.

FAQ

Q1: What is FUJI PM05EK2 PM05EL2 W040-SW080-S JAW used for?A1: It is used for FUJI pick and place machine H01 and H02 head applications. It supports component gripping, holding, transfer, and placement stability during SMT production.

Q2: How can I confirm whether this JAW fits my FUJI machine?A2: Please check the old part number, model standard, machine model, and head type. You can also send clear product photos to us for confirmation before ordering.

Q3: Can this JAW solve missing pickup or component drop problems?A3: If the problem is caused by a worn, damaged, or unstable JAW, replacing it with the correct PM05EK2 / PM05EL2 W040-SW080-S model may help improve pickup stability.

Q4: Is this product suitable for H01 and H02 heads?A4: Yes, this product is listed for FUJI pick and place machine H01 and H02 head applications. Please confirm the actual machine and part number before purchase.

Q5: Do you provide new or used stock?A5: Stock condition depends on actual inventory. We can help confirm whether original new, original used, or replacement stock is available before quotation and shipment.

Q6: Can I order only one piece?A6: Yes, small quantity orders can be supported depending on stock. For factories and distributors, batch quantity orders can also be arranged according to availability.

Q7: How do you pack this product for international delivery?A7: The product will be packed with protective material and export carton packaging. Anti-static or customized packing can be arranged according to product condition and customer requirements.

Q8: What information should I provide when sending an inquiry?A8: Please provide part number, quantity, machine model, head type, destination country, and product photos if available. This helps us quote faster and confirm compatibility.

Contact Us

If you need FUJI PM05EK2 PM05EL2 W040-SW080-S JAW for FUJI pick and place machine H01 or H02 head, please contact us with your required quantity, machine model, part number, and photos if available. We can help check compatibility, confirm current stock, provide quotation, and arrange fast international shipment.

We also supply FUJI SMT machine spare parts, FUJI feeder parts, FUJI nozzle parts, FUJI head parts, FUJI motor, FUJI driver, FUJI sensor, FUJI board, FUJI valve, FUJI cylinder, FUJI belt, and other SMT production maintenance parts. Welcome to send your inquiry for professional SMT spare parts support, quick quotation, careful packing, and reliable global delivery.