FUJI R36-025-260 AA0HM00 AA0HM11 AA0HM12 NXT AIMEX H01 H02 2.5mm Pickup Nozzle

FUJI R36-025-260 AA0HM00 AA0HM11 AA0HM12 NXT AIMEX H01 H02 2.5mm Pickup Nozzle

The FUJI R36-025-260 2.5mm pickup nozzle, associated with part references AA0HM00, AA0HM11 and AA0HM12, is intended for compatible FUJI NXT and AIMEX SMT placement equipment equipped with H01 or H02 head configurations. As the direct interface between the placement head and electronic component, the nozzle performs an essential role in vacuum pickup, component transfer, positioning and release.

During high-speed SMT production, even minor nozzle wear, contamination or deformation can affect pickup stability and placement consistency. Replacing a worn nozzle with the correct specification helps maintain smooth machine operation and reduce unnecessary pickup alarms.

This 2.5mm nozzle is suitable for electronics manufacturers, SMT maintenance departments, equipment repair companies and spare-parts distributors requiring replacement parts for scheduled maintenance, emergency repair or production inventory. Model, machine configuration and existing nozzle markings should be confirmed before ordering.

SMT pickup nozzles operate continuously throughout each placement cycle. The nozzle moves down toward a component, creates vacuum pressure, lifts the component, transfers it through the placement process and releases it onto the PCB.

Because this process may be repeated thousands of times during every production shift, nozzle condition gradually changes.

Common causes of nozzle-related problems include:

• Tip surface wear.
• Dust inside the vacuum opening.
• Flux or production contamination.
• Mechanical impact.
• Incorrect cleaning methods.
• Damaged pickup surfaces.
• Incorrect nozzle selection.
• Long-term continuous operation.
• Improper storage.
• Foreign particles inside the air channel.

When nozzle condition deteriorates, the machine may still operate, but pickup performance may become inconsistent.

A nozzle should therefore be considered a regular maintenance item rather than a permanent machine component.

The R36-025-260 2.5mm pickup nozzle provides a replacement solution for compatible NXT and AIMEX production environments.

Correct nozzle replacement can help restore:

• Consistent component pickup.
• Stable vacuum contact.
• Smooth component transfer.
• Reliable placement movement.
• Reduced unexpected pickup errors.
• Better maintenance predictability.
• Faster recovery from nozzle-related downtime.

For maintenance teams, keeping commonly used pickup nozzles in stock can reduce waiting time when a nozzle becomes damaged during production.

Before ordering, buyers should compare the required part with the existing nozzle.

Because machine versions and configurations may vary, matching the currently installed nozzle is recommended whenever possible.

Note: Final compatibility should be checked according to machine model, head configuration and original nozzle marking.

The R36-025-260 pickup nozzle is mainly used in automatic SMT component placement processes.

• FUJI NXT production lines.
• FUJI AIMEX placement equipment.
• H01 placement head applications.
• H02 placement head applications.
• PCB assembly factories.
• Electronics manufacturing lines.
• SMT repair departments.
• Preventive maintenance inventory.
• Replacement spare-parts stock.

The pickup nozzle works together with the placement head, vacuum system, feeder, camera and machine control system.

The placement head moves the nozzle above the programmed feeder or component pickup location.

The nozzle descends toward the component surface.

Negative pressure is generated through the internal vacuum path.

The component is held against the nozzle tip by vacuum force.

The placement head carries the component toward the recognition and placement position.

The vision system checks component position and orientation while the nozzle keeps the component stable.

The component is moved to the programmed PCB coordinate.

Vacuum pressure is removed and the component is released onto the PCB.

Stable nozzle condition is important throughout every stage.

Correct nozzle selection should be based on machine configuration and existing part information.

Check whether your equipment belongs to the compatible NXT or AIMEX platform.

Verify whether the placement head is H01 or H02.

Look for the current nozzle marking or maintenance record.

The product described on this page is a 2.5mm pickup nozzle.

Check whether your requirement includes:

• R36-025-260.
• AA0HM00.
• AA0HM11.
• AA0HM12.

For older equipment, modified machines or uncertain specifications, a clear photo of the original nozzle can help with identification.

Providing complete information allows faster quotation and reduces the risk of ordering an incorrect replacement.

Regular nozzle inspection is recommended for stable SMT operation.

Typical inspection items include:

• Nozzle tip condition.
• Vacuum hole cleanliness.
• Shaft condition.
• Mounting surface.
• Foreign material.
• Physical deformation.
• Product identification.
• Packaging condition before storage.

Using sharp metal tools to clean precision nozzle openings should generally be avoided because they may damage the pickup surface or vacuum passage.

Nozzles are comparatively small components, but a damaged nozzle can stop a placement position and affect production output.

For factories operating multiple shifts, keeping spare nozzles available provides several practical advantages:

• Faster maintenance response.
• Reduced emergency sourcing.
• Lower risk of extended machine downtime.
• Easier preventive replacement.
• Better maintenance planning.
• Convenient spare-parts control.

A small inventory of frequently used nozzle models can therefore provide significant value for continuous SMT production.

The nozzle is supplied for compatible FUJI NXT and AIMEX placement equipment using appropriate H01 or H02 head configurations. Always verify the installed nozzle model and head specification before purchasing replacement parts.

These numbers are used as related references for this 2.5mm nozzle specification. Because machine revisions may differ, buyers should compare the original nozzle marking, machine model and head configuration before confirming an order.

Please provide the machine model, head type, nozzle model, part reference, quantity and, when available, a clear photo of the existing nozzle. This helps us verify the requested specification efficiently.

Replacement should be considered when the nozzle tip is worn, damaged, contaminated, blocked or causes repeated pickup instability. Preventive replacement is also recommended according to production usage and maintenance schedules.

Yes. The nozzle is suitable for individual replacement, regular factory maintenance stock and batch spare-parts requirements. Please provide the requested reference and quantity so availability and quotation details can be prepared.

Need R36-025-260, AA0HM00, AA0HM11 or AA0HM12 2.5mm pickup nozzles for your NXT or AIMEX equipment?

Please send your machine model, head model, nozzle reference, required quantity and existing part photo. We can assist with specification checking and prepare a suitable quotation for maintenance, replacement or production inventory requirements.

Bulk purchasing lists and mixed SMT spare-parts inquiries are also welcome.