Panasonic N510042740AA SANYO DENKI P50BA2002BXS3C 3W Angle Motor for CM402 CM602

Panasonic N510042740AA SANYO DENKI P50BA2002BXS3C 3W Angle Motor for CM402 CM602

The Panasonic N510042740AA KXF0DGEAA00 3W motor, identified by the SANYO DENKI model P50BA2002BXS3C, is a compact precision motion component designed for compatible Panasonic CM402 and CM602 SMT placement machine configurations. It is used where reliable controlled rotation and repeatable positioning are required during automated PCB assembly.

As SMT machines operate at high cycle rates, even a small motor can play an important role in maintaining smooth mechanical movement. A worn or unstable motor may contribute to abnormal rotation, inconsistent positioning, motion alarms, increased maintenance frequency, or unexpected production downtime.

For replacement purchasing, the safest identification method is to verify the original motor label and match the available references: N510042740AA, KXF0DGEAA00, and P50BA2002BXS3C. Buyers should also confirm the machine model, installation position, connector configuration, and motor appearance before ordering.

This motor is suitable for SMT factories, equipment maintenance companies, EMS manufacturers, electronics production facilities, and spare-parts distributors requiring reliable CM-series machine replacement components.

Cause

Why Does an SMT Motor Need Replacement?

SMT placement machines perform continuous high-speed mechanical movements throughout production. Motors repeatedly accelerate, stop, rotate, and position connected mechanisms according to machine commands. Over time, operating conditions can affect motor performance.

Common reasons for inspection or replacement include:

Typical Warning Signs

Maintenance personnel may notice:

• Abnormal or intermittent motor movement.
• Unusual mechanical noise.
• Delayed movement response.
• Positioning-related machine alarms.
• Irregular rotation.
• Excessive vibration.
• Unexpected stopping.
• Increased operating temperature.
• Repeated motion errors after machine restart.

These symptoms do not always mean the motor itself is defective. The related connector, cable, mechanical load, drive circuit, mounting structure, and machine control system should also be inspected.

Solution

When inspection confirms that the original motor requires replacement, selecting the correct matching part is important for maintaining machine reliability.

For this product, verify the following identifiers:

A correct replacement should match the original motor specification rather than being selected only by appearance.

Recommended Verification Process

Step 1: Check the machine model.

Step 2: Read the original motor label.

Step 3: Confirm N510042740AA or KXF0DGEAA00.

Step 4: Verify P50BA2002BXS3C.

Step 5: Confirm the 3W rating.

Step 6: Compare the connector and cable arrangement.

Step 7: Compare mounting dimensions and shaft configuration.

Step 8: Confirm the exact installation position before purchase.

This process reduces the risk of ordering an incorrect motor and helps shorten machine maintenance time.

Specifications

Product Identification Table

Related Motor Comparison

CM-series placement equipment can contain different motors with different power ratings and functions. Similar appearance does not mean direct interchangeability.

Important

Different motors may vary in:

• Output power.
• Motor body dimensions.
• Shaft design.
• Connector type.
• Cable length.
• Mounting points.
• Rotation characteristics.
• Machine installation location.

For this reason, N510042740AA should be ordered according to the original part number and motor model.

Application

Panasonic CM402 SMT Machine

The CM402 is designed for automated electronic component placement and uses multiple precision mechanical and electrical components to complete coordinated motion.

The N510042740AA motor can be used in compatible CM402 configurations where the original motor identification corresponds to this part number and model.

Panasonic CM602 SMT Machine

The motor is also commonly used as a replacement component for compatible CM602 machine configurations.

Because CM602 equipment contains different motors in different positions, the original label should always be checked before ordering.

SMT Production Line Maintenance

The motor is suitable for maintenance teams working with:

Typical Industry Applications

This motor can support maintenance requirements in production facilities serving:

• Consumer electronics.
• Automotive electronics.
• Communication equipment.
• Industrial control systems.
• Power electronics.
• LED products.
• Computer hardware.
• Home appliance electronics.
• Medical electronics manufacturing.
• EMS contract manufacturing.

For factories running multiple CM402 or CM602 machines, maintaining correctly identified spare motors can help reduce production interruptions.

How It Works

The P50BA2002BXS3C motor converts electrical control signals into controlled mechanical movement.

A simplified operating sequence is:

Machine Command → Motor Control → Motor Rotation → Mechanical Movement → Position Completion

1. Machine Command

The SMT equipment control system determines the movement required during the programmed production sequence.

2. Motor Control Signal

The machine sends the corresponding control signal through the related drive and control system.

3. Motor Rotation

The motor responds by generating controlled rotary motion.

4. Mechanical Transmission

The motor transfers movement to the connected mechanical assembly.

5. Positioning

The mechanism reaches the required position and completes the programmed movement.

This process repeats continuously during normal SMT production.

Why Stable Motor Performance Matters

SMT equipment depends on synchronized, repeatable movement. Unstable motor performance can affect machine efficiency and maintenance frequency.

A motor should therefore be treated as an important precision spare part rather than selected only according to price.

How To Choose

1. Confirm the Main Part Number

The most important reference is:

N510042740AA

Use this number first when comparing a replacement motor.

2. Confirm the Reference Number

Also check:

KXF0DGEAA00

This reference may appear in machine records, supplier databases, or older maintenance information.

3. Confirm the Motor Model

The motor model should match:

SANYO DENKI P50BA2002BXS3C

4. Confirm the Power Rating

The rated output is:

3W

Do not substitute another motor simply because the external dimensions look similar.

5. Confirm Machine Model

Typical compatible equipment:

• CM402.
• CM602.

However, the machine model alone is not sufficient because one machine can use several different motor specifications.

6. Check the Connector

Compare:

• Connector shape.
• Pin configuration.
• Cable direction.
• Cable length.
• Connector position.

7. Compare Mechanical Details

Check:

• Shaft shape.
• Motor dimensions.
• Mounting points.
• Bracket position.
• Cable outlet direction.

8. Provide Photos for Confirmation

If compatibility is uncertain, provide:

Machine Model + Part Number + Motor Label Photo + Connector Photo + Required Quantity

This greatly improves quotation and compatibility confirmation efficiency.

Ordering Checklist

Providing complete information helps suppliers respond more quickly and accurately.

Maintenance Recommendations

Before replacing the motor, check the complete motion system.

Inspect the Connector

Make sure the connector is fully seated and free from contamination or visible damage.

Inspect the Cable

Check for cuts, crushing, bending damage, or loose terminals.

Check Mechanical Resistance

A motor may appear weak if the connected mechanism is binding or excessively loaded.

Check Mounting

Loose screws or incorrect alignment may affect machine movement.

Check the Related Drive System

If the motor is not receiving the correct command, replacing the motor alone may not solve the problem.

Record Machine Alarms

Error codes and maintenance history can help determine whether the motor is the actual fault source.

Storage Recommendations

For spare inventory, the motor should be stored in a clean and dry environment.

Recommended practices include:

• Keep away from moisture.
• Protect the connector.
• Avoid heavy pressure on the cable.
• Avoid mechanical impact.
• Keep the motor properly labeled.
• Store away from corrosive environments.
• Use suitable protective packaging.

A useful warehouse label is:

N510042740AA / KXF0DGEAA00 / P50BA2002BXS3C / 3W / CM402 CM602

This helps avoid mixing the motor with other visually similar spare parts.

FAQ

Q1: What is the complete identification of this motor?

The main Panasonic part number is N510042740AA, with reference number KXF0DGEAA00. The corresponding SANYO DENKI motor model is P50BA2002BXS3C, rated at 3W.

Q2: Is this motor suitable for CM402 and CM602 machines?

It is used in compatible CM402 and CM602 configurations. Because these machines contain multiple motor types, confirm the original part number, motor label, connector, and installation position before ordering.

Q3: Can I replace another CM-series motor with this 3W motor?

A replacement should not be selected only according to appearance. Different CM-series motors can have different power ratings, mechanical dimensions, connectors, shafts, and applications. Always match the original specification.

Q4: What information should I send for a quotation?

Please provide the machine model, N510042740AA or original part number, required quantity, destination country, and clear photos of the original motor label and connector.

Q5: What should be checked if the machine still has an alarm after motor replacement?

Check the motor connector, cable, associated mechanical mechanism, control circuit, mounting position, and related machine drive components. A motion alarm can have several possible causes.

Contact Us

Looking for Panasonic N510042740AA KXF0DGEAA00 SANYO DENKI P50BA2002BXS3C 3W Motor for CM402 or CM602 equipment?

Send us the following information for faster quotation and compatibility confirmation:

Machine model + part number + required quantity + original motor photo + motor label photo.

We can assist with part identification, motor matching, quotation, packing, and international shipment for SMT maintenance requirements.

We also supply a wide range of SMT machine spare parts, including motors, drivers, feeders, feeder parts, nozzles, sensors, cylinders, belts, boards, and other replacement components.

Send your inquiry for current price, availability, and part-number confirmation.