SANYO DENKI P50B02002DXS28 17W Z-Axis Motor KGS-M4880-00X for YG100 60X 70X

SANYO DENKI P50B02002DXS28 17W Z-Axis Motor KGS-M4880-00X for YG100 60X 70X

The SANYO DENKI P50B02002DXS28 17W Z-Axis Motor KGS-M4880-00X is a precision motion component used in compatible YG100, YG60X and YG70X SMT pick-and-place equipment. Its primary function is to provide controlled vertical movement for the placement-head mechanism, supporting repeated upward and downward positioning during component pickup and placement cycles.

In high-speed SMT production, Z-axis movement directly affects nozzle approach, component pickup, placement height and cycle consistency. A motor with unstable response, excessive vibration or deteriorated performance can cause positioning errors, abnormal head movement and production interruptions.

This replacement motor is suitable for equipment maintenance, preventive spare-parts stocking and repair projects where the machine requires the corresponding P50B02002DXS28 / KGS-M4880-00X motor specification. Buyers are recommended to verify both the motor model and machine part number before ordering.

Cause – Why Z-Axis Motor Problems Occur

The Z-axis motor operates repeatedly throughout the placement process. Continuous acceleration, deceleration and frequent vertical movement can gradually affect motor performance.

Typical symptoms may include abnormal Z-axis noise, inconsistent head movement, positioning alarms, slow response or intermittent axis operation.

Before replacing the motor, technicians should also inspect cables, connectors, mechanical resistance and the related drive system to confirm the actual source of the fault.

Solution – Reliable Replacement for Z-Axis Maintenance

Replacing a deteriorated Z-axis motor with the correct specification can help restore stable motion and reduce repeated machine alarms.

The P50B02002DXS28 provides a practical replacement option when the existing machine motor corresponds to KGS-M4880-00X.

Key Maintenance Benefits

• Supports stable vertical head movement.
• Helps restore consistent Z-axis positioning.
• Suitable for preventive and corrective maintenance.
• Reduces downtime caused by worn motion components.
• Allows maintenance teams to keep critical motors in spare-parts inventory.
• Model identification simplifies replacement verification.
• Designed for demanding repetitive SMT machine motion.

For production lines where machine uptime is critical, keeping the correct Z-axis motor in stock can considerably shorten maintenance response time.

Specifications

Important: Machine configurations may differ according to production year, head specification and equipment revision. Confirm the original motor label and part number before purchase.

Application

The P50B02002DXS28 motor is mainly used as a Z-axis motion component in compatible SMT placement equipment.

It is particularly useful for SMT factories, machine maintenance departments, equipment refurbishers and SMT spare-parts distributors.

How It Works

During an SMT placement cycle, the machine head performs coordinated movements along multiple axes. The Z axis controls the vertical travel of the relevant head mechanism.

A typical cycle includes:

1. Positioning Above the Feeder
The placement head travels to the component pickup position.

2. Z-Axis Downward Movement
The Z-axis motor drives the head or nozzle mechanism downward toward the component.

3. Component Pickup
The nozzle reaches the programmed pickup height and collects the electronic component.

4. Z-Axis Retraction
The motor lifts the nozzle assembly to the required travel position.

5. PCB Positioning
The machine moves the component to its programmed board coordinate.

6. Placement Movement
The Z-axis motor lowers the component toward the PCB at the controlled placement height.

7. Return Cycle
After placement, the mechanism retracts and begins the next pickup cycle.

Because these movements occur repeatedly during production, smooth motor response is important for stable placement performance.

Performance Advantages

The main purchasing advantage is not simply motor power. Correct model, part number, mounting configuration and machine compatibility are equally important.

How To Choose

Selecting an SMT motor only by appearance can result in incorrect installation. Before placing an order, compare the original part carefully.

Step 1 – Check Motor Model

Confirm that the motor label shows:

P50B02002DXS28

Even similar-looking motors within the same series may have different specifications.

Step 2 – Confirm Machine Part Number

Check whether your machine documentation or removed motor corresponds to:

KGS-M4880-00X

The part number is one of the most important references for compatibility.

Step 3 – Confirm Machine Model

Verify whether the motor is intended for your machine configuration, such as:

• YG100
• YG60X
• YG70X

Step 4 – Confirm Axis Position

This product is intended for a Z-axis application. Do not select it solely because another axis uses a visually similar motor.

Step 5 – Compare the Existing Motor

For the safest identification, provide:

Providing these details before shipment can reduce the risk of ordering an incorrect motor.

Why This Part Matters in SMT Production

A Z-axis motor is a relatively small component compared with the complete placement machine, but a single motor failure can stop the corresponding head or interrupt production.

For high-mix or continuous SMT production lines, replacement speed is therefore important.

Keeping the correct motor in stock offers several practical benefits:

• Faster response to unexpected machine failures.
• Less dependence on emergency overseas sourcing.
• Reduced production interruption.
• Easier preventive maintenance planning.
• Better control of critical spare-parts inventory.

For customers operating multiple compatible machines, stocking frequently used motion components can significantly improve maintenance efficiency.

Quality and Inspection

Before installation, the motor should be checked for model consistency, external condition, connector condition and shaft movement.

Recommended incoming inspection includes:

Professional installation by trained SMT maintenance personnel is recommended.

FAQ

1. What is the P50B02002DXS28 motor used for?

It is used as a 17W Z-axis motor in compatible SMT placement equipment. The motor controls precise vertical movement of the related head mechanism during component pickup and placement operations.

2. Is P50B02002DXS28 the same reference as KGS-M4880-00X?

P50B02002DXS28 identifies the motor model, while KGS-M4880-00X is the corresponding machine spare-part reference supplied for this application. Buyers should verify both numbers against their existing motor before ordering.

3. Can this motor be used for YG100, YG60X and YG70X machines?

It is supplied for compatible configurations of these YG-series machines. Because machine revisions can differ, we recommend checking the original motor model, part number, connector and installation position before purchase.

4. How can I confirm compatibility before ordering?

Send the motor nameplate photo, machine model, original part number and a clear image of the connector. These details make it easier to compare your existing component with the required replacement.

5. Why should factories keep this motor as a spare?

Z-axis motors operate through a large number of repetitive movement cycles. Keeping a correctly matched spare motor can shorten repair time and reduce production losses when an unexpected motor failure occurs.

Contact Us

Need the SANYO DENKI P50B02002DXS28 / KGS-M4880-00X Z-axis motor for your SMT machine?

Send us your required quantity, machine model, original motor label and part number for compatibility checking and quotation. Clear motor and connector photos are welcome for faster confirmation.

Send your inquiry now for price, stock status and delivery information.