DEK 210520 Dunkermotoren BG75X50CI E100 Table Lift Motor for DEK printers

DEK 210520 Dunkermotoren BG75X50CI E100 Table Lift Motor for DEK printers

The Dunkermotoren BG75X50CI E100 DEK 210520 Table Lift Motor is a critical motion component used in the rising table mechanism of compatible DEK SMT solder paste printers. DEK spare-parts references identify 210520 as the Motor Assy. Table Lift, and related records associate the assembly with reference 03130148 or 03130148-01.

During automatic solder paste printing, the printer table must move vertically in a controlled sequence to support PCB positioning and the printing process. A worn, damaged, or electrically faulty table lift motor can result in abnormal table movement, positioning interruption, motion alarms, or machine downtime.

This replacement component is suitable for SMT factories, EMS manufacturers, printer service companies, equipment maintenance departments, and spare-parts distributors requiring an accurately identified motor for DEK printer repair.

Because the BG75X50 CI motor family is available in more than one electrical configuration, the existing motor nameplate, DEK part number, connector configuration, and machine information should always be verified before replacement. Dunkermotoren documentation lists both 24 V and 40 V versions of the BG 75x50 CI family.

The table lifting mechanism operates repeatedly during normal printer production. Continuous motion, mechanical loading, electrical stress, contamination, and long-term component aging can gradually affect motor performance.

Common conditions that may lead to inspection or replacement include:

• Table fails to rise or lower normally.
• Vertical movement becomes intermittent.
• Unusual noise occurs during table movement.
• Machine displays a table or motion-related alarm.
• Motor operates inconsistently.
• Table positioning becomes unstable.
• Motor temperature becomes abnormal.
• Connector or cable damage interrupts motor operation.
• Mechanical resistance increases the load on the motor.

A table movement fault does not automatically mean that the motor itself has failed. Maintenance personnel should also inspect cables, connectors, drive signals, sensors, transmission components, bearings, couplings, and the mechanical lift system.

When diagnosis confirms a defective table lift motor, selecting the replacement by DEK part number 210520 and Dunkermotoren model BG75X50CI E100 helps improve identification accuracy.

The recommended verification sequence is:

DEK Part Number → Motor Model → Motor Label → Voltage → Connector → Shaft → Mounting → Machine Model

Part number 210520 is independently listed as the rising table or table lift motor assembly in DEK spare-parts references.

This verification process is especially important because motors with similar external dimensions may use different electrical ratings, control electronics, connectors, or mechanical interfaces.

The following data is manufacturer-level information for the broader BG 75x50 CI family. It should not be treated as confirmation that every DEK 210520 E100 assembly uses the same electrical version.

Important: Always use the specifications printed on the existing BG75X50CI E100 motor as the final reference for replacement selection.

DEK printers use different motors for separate machine functions. Part number matching is therefore more reliable than selecting a motor only by appearance.

DEK parts references separately identify these motor applications, confirming that 210520 belongs to the rising table function rather than the camera, rail, or print carriage drive.

The DEK 210520 Table Lift Motor is used in the vertical table movement system of compatible DEK solder paste printers.

Typical application environments include:

Suitable for electronics manufacturing facilities producing:

• Automotive electronics.
• Industrial control boards.
• Consumer electronics.
• Communication products.
• LED assemblies.
• Power supply boards.
• Medical electronics.
• Computer hardware.
• Electronic modules.

The motor can be kept as a critical maintenance spare for factories operating DEK printing equipment. Maintaining frequently required machine parts can help reduce repair waiting time when unexpected equipment faults occur.

It can be used during printer refurbishment or repair when the existing table lift motor is confirmed to be damaged or no longer operating correctly.

SMT spare-parts distributors can stock the 210520 motor for customers requiring DEK printer maintenance components.

The BG75X50CI E100 motor forms part of the controlled mechanical system that raises and lowers the printer table.

The general working sequence is:

The printer control system determines when vertical table movement is required during the automatic printing cycle.

The table lift motor receives the required electrical and control command.

The motor generates controlled rotational movement.

The table lift mechanism converts motor rotation into the required table movement.

The table moves to the programmed vertical operating position.

When the required position is achieved, the printer continues the corresponding board support, alignment, printing, or transfer sequence.

A stable table lift mechanism therefore contributes to smooth and repeatable printer operation.

The most important reference is:

DEK 210520

This number is documented as the table lift motor assembly.

Check that the original motor is marked:

Dunkermotoren BG75X50CI E100

A clear label photograph is recommended.

Do not assume voltage from the basic BG75X50CI model alone.

The manufacturer lists both 24 V and 40 V configurations in the BG75X50 CI family.

Confirm:

• Nominal voltage.
• Current.
• Motor configuration.
• Integrated electronics.
• Connector arrangement.

Check the original motor for:

• Connector shape.
• Number of connectors.
• Pin configuration.
• Cable direction.
• Cable length.
• Signal interface.

Verify:

• Motor body.
• Shaft dimensions.
• Shaft type.
• Mounting holes.
• Bracket arrangement.
• Coupling structure.
• Overall installation dimensions.

For accurate verification, send the printer model together with motor and part-number information.

DEK 210520 is identified as the table lift or rising table motor assembly. It provides the motor drive required for controlled vertical movement of the printer table during the machine operating sequence.

BG75X50CI E100 identifies the Dunkermotoren motor configuration, while 210520 identifies the DEK table lift motor assembly application. Both references should be checked together when selecting a replacement.

The exact E100 unit should be confirmed from its original nameplate. Manufacturer documentation for the broader BG75X50 CI family includes 24 V and 40 V versions, so the voltage should not be assumed from the base model alone.

Please provide DEK part number 210520, BG75X50CI E100 motor label photos, the complete DEK printer model, connector photos, existing motor photos, and the required quantity for accurate confirmation.

The motor should be replaced only after troubleshooting confirms the fault. The lift mechanism, cables, connectors, sensors, drive signals, mechanical transmission, and machine alarms should also be inspected before replacement.

Looking for a Dunkermotoren BG75X50CI E100 DEK 210520 Table Lift Motor for your SMT printer?

Send us your DEK part number, motor model, nameplate photo, machine model, connector photo, and required quantity. We can help verify the configuration before quotation and provide a suitable replacement solution for your printer maintenance requirement.

For distributors, repair companies, and SMT factories requiring multiple DEK spare parts, send your complete parts list for a consolidated quotation.