Panasonic N610071334AA Sintered Filter for CM402 CM602 Machines - Contamination Filtration for Preventive Maintenance

Panasonic N610071334AA Sintered Filter for CM402 CM602 Machines

The Panasonic N610071334AA sintered filter is a precision SMT spare part designed for maintenance applications on CM402 and CM602 pick-and-place machines. Installed within the corresponding pneumatic or vacuum-related system, the filter helps reduce dust, oil residue, component debris, and other production contaminants before they reach sensitive internal passages and operating components.

Its compact porous structure supports controlled airflow while helping maintenance teams keep the machine system cleaner during continuous PCB assembly production. The N610071334AA filter is suitable for scheduled preventive maintenance, machine refurbishment, emergency replacement, and spare-parts inventory preparation.

Because SMT machines can use several filters with similar appearances, customers should verify the complete part number, machine model, installation position, and original filter structure before ordering. Clear product photographs and machine information allow faster compatibility confirmation and help prevent purchasing errors.

Pick-and-place machines operate through coordinated mechanical, electrical, pneumatic, and vacuum systems. During continuous production, airborne dust and process-related contamination can gradually enter the machine environment.

Carrier tape particles, cardboard fibers, component debris, lubricant residue, workshop dust, and compressed-air contamination may collect inside the filter. As contamination accumulates, the effective airflow area can become smaller.

A filter may still appear structurally complete while its internal porous passages have already become partially restricted. Regular inspection is therefore important for maintaining consistent machine operation.

Maintenance personnel should inspect the filter when any of the following conditions appear:

Filter replacement alone may not solve every pneumatic or vacuum problem. Hoses, seals, fittings, valves, regulators, pumps, nozzles, and sensors should also be inspected when machine performance remains unstable.

Replacing a contaminated filter with the correctly matched N610071334AA component helps restore a cleaner airflow path and reduces the possibility that accumulated particles will continue moving through sensitive machine systems.

A correct replacement can support:

• Cleaner pneumatic or vacuum passages.
• More consistent airflow conditions.
• Stable machine maintenance performance.
• Reduced contamination around internal components.
• Better preventive-maintenance management.
• Faster recovery during emergency repairs.
• Lower risk of repeated contamination-related interruption.
• Improved spare-parts traceability.

The machine model and installation position should be confirmed before purchase because CM402 and CM602 equipment may contain several different filtration components.

Installation should be carried out by trained maintenance personnel familiar with SMT pick-and-place equipment.

Exact dimensions, pore size, filtration accuracy, operating pressure, and material composition should not be assumed from the product appearance alone.

For an accurate compatibility check, please provide one or more of the following:

This process is particularly important for rebuilt, modified, relocated, or second-hand SMT machines.

The following table is for purchasing guidance. Similar-looking filters should not be treated as automatically interchangeable.

The N610071334AA filter is designed for maintenance use on CM402 and CM602 pick-and-place machines. It is suitable for production facilities requiring reliable SMT spare-parts support and organized preventive-maintenance programs.

• SMT production factories.
• Electronics manufacturing service providers.
• PCB assembly companies.
• Pick-and-place machine maintenance teams.
• Equipment repair contractors.
• SMT machine refurbishment companies.
• Industrial spare-parts distributors.
• International procurement departments.
• Factory engineering teams.
• Preventive-maintenance service providers.

The filter is inspected during planned machine servicing and replaced before contamination becomes severe.

A dirty, damaged, or blocked filter is replaced during troubleshooting to restore a clean airflow path.

Used CM402 or CM602 machines can receive new filters during cleaning, testing, and rebuilding procedures.

Filters can be inspected and replaced when machines are moved between factories or production areas.

Factories can keep N610071334AA filters in stock to reduce waiting time during unexpected maintenance.

The filter can be included in annual purchasing plans together with nozzles, feeder parts, belts, sensors, valves, and other frequently replaced components.

The N610071334AA filter uses a porous structure to create multiple small airflow passages. Air can pass through the filter while dust and production contaminants are retained on the surface or within the porous media.

This process helps reduce the amount of contamination traveling toward downstream pneumatic or vacuum-related components.

A filter is a small component, but its operating condition can affect the cleanliness of the complete air or vacuum-related circuit.

When a filter becomes severely clogged, the system may require more time to establish the correct airflow or vacuum response. When a damaged filter allows contamination to pass through, valves, tubing, fittings, or other internal components may require additional cleaning or replacement.

Regular filter maintenance is therefore a cost-effective method for supporting stable SMT machine operation.

The required part number should be N610071334AA.

Avoid ordering only by descriptions such as:

• CM402 filter.
• CM602 filter.
• SMT machine filter.
• Pick-and-place filter.
• Sintered filter.

A machine may use several filter types, so the complete part number provides the most accurate purchasing reference.

Provide the exact machine model:

• CM402.
• CM602.

The complete machine nameplate is recommended when the equipment has been rebuilt, modified, or transferred between factories.

Send a clear photograph showing:

• The original filter.
• The surrounding holder.
• The air tubing or connection.
• The installation direction.
• Nearby machine components.

An installation photograph is often more useful than a filter photograph alone.

Check the following details before ordering:

For maintenance orders, consider:

Clearly state whether you require:

• New product.
• Individual packaging.
• Bulk packaging.
• Custom part-number labels.
• Consolidated shipment.
• Urgent express delivery.
• Standard export carton.
• Sample inspection before bulk supply.

Complete information helps reduce quotation time and improves compatibility confirmation.

For strict technical requirements, customers should confirm samples or provide an approved drawing before bulk ordering.

1. Stop the machine according to factory safety procedures.
2. Turn off the relevant electrical and pneumatic systems.
3. Release remaining pressure before removing the filter.
4. Record the original filter orientation.
5. Remove the old filter using clean maintenance tools.
6. Inspect the holder, housing, seal, and air passage.
7. Clean loose contamination from the surrounding area.
8. Compare the replacement filter with the original part.
9. Install the filter without cutting, bending, or forcing it.
10. Reassemble all related components correctly.
11. Restore the pneumatic or vacuum system gradually.
12. Check for leakage, abnormal sound, or machine alarms.
13. Run a controlled operating test.
14. Record the replacement date.

There is no single replacement interval suitable for every production facility. Filter service life depends on:

• Daily machine operating hours.
• Number of production shifts.
• Factory cleanliness.
• Compressed-air quality.
• Oil or moisture exposure.
• Preventive-maintenance frequency.
• Machine condition.
• Production environment.
• Nearby cutting or packaging processes.
• Previous maintenance history.

Condition-based inspection combined with scheduled maintenance is recommended.

• International express for urgent orders.
• Air freight for medium-volume shipments.
• Sea freight for consolidated bulk orders.
• Customer-appointed shipping agent.
• Combined shipment with other SMT parts.
• Delivery terms confirmed according to destination and order quantity.

The N610071334AA filter is mainly used for CM402 and CM602 pick-and-place machines. Please provide the complete machine model and original filter photographs because different installation positions may require different filter references.

This filter helps capture dust, oil residue, and small production contaminants from the machine’s pneumatic or vacuum airflow path, supporting cleaner internal passages and more consistent equipment maintenance performance.

Replace the filter when heavy discoloration, visible contamination, physical damage, reduced airflow, unstable vacuum response, or repeated pneumatic alarms are observed. Regular inspection is recommended during scheduled machine maintenance.

Please provide part number N610071334AA, machine model, required quantity, destination country, product condition, existing filter photographs, installation-position photographs, and dimensions when compatibility requires additional confirmation.

Yes. The N610071334AA filter can be consolidated with nozzles, feeder components, belts, sensors, valves, cylinders, motors, bearings, and other SMT maintenance parts to simplify purchasing and international shipment.

Please send the following information for a fast quotation:

• Product name: SMT Sintered Filter.
• Part number: N610071334AA.
• Machine model: CM402 or CM602.
• Required quantity.
• Existing filter photograph.
• Installation-position photograph.
• Product condition requirement.
• Destination country.
• Preferred shipping method.
• Other SMT spare parts required.

Clear purchasing information allows faster compatibility checking, accurate quotation preparation, suitable packaging, and efficient shipment arrangement.

Contact us for sample orders, batch supply, preventive-maintenance purchasing, consolidated SMT spare-parts shipments, and international delivery support.