JUKI E2282-725-0A0 XR Pusher Assembly for FX-1R SMT Mounter with XR-designated Mechanism

The JUKI E2282-725-0A0 PUSHER XR ASM. is a mechanical pusher assembly developed for the designated XR installation position of the JUKI FX-1R SMT pick and place machine. It is mainly used for machine repair, preventive maintenance, equipment refurbishment, and critical spare-parts inventory preparation.

During long-term SMT production, repeated mechanical movement, vibration, contamination, loose fastening components, incorrect adjustment, or accidental impact may affect the condition of the existing pusher mechanism. Replacing a damaged or excessively worn assembly helps maintenance technicians restore controlled mechanical movement and reduce unexpected production interruptions.

The complete part number, machine model, XR designation, installation position, and removed-part appearance should be confirmed before ordering. Customers are encouraged to provide clear photographs of the existing assembly and machine nameplate. This verification process helps reduce incorrect selection, installation delays, and international return costs.

The E2282-725-0A0 pusher assembly forms part of the mechanical movement system inside the applicable SMT placement machine. It works together with the surrounding drive, cylinder, bracket, shaft, stopper, fastening, and control components.

Its main purpose is to provide the required pusher movement at the designated XR position. Correct movement depends on proper assembly installation, mechanical alignment, surrounding component condition, machine adjustment, and maintenance quality.

SMT placement machines operate continuously under high-cycle production conditions. Mechanical assemblies may gradually develop wear even when the equipment receives regular maintenance.

The pusher assembly should be inspected when technicians observe abnormal movement, unusual sound, visible damage, excessive clearance, repeated adjustment requirements, or unstable operation of the related mechanism.

A machine fault should be diagnosed carefully before replacing the pusher assembly. Similar symptoms may also be caused by cylinders, sensors, brackets, shafts, control signals, mounting hardware, or other connected components.

The E2282-725-0A0 PUSHER XR ASM. provides a clearly identified replacement solution for the corresponding XR pusher position.

Using the complete assembly part number can simplify procurement compared with identifying and purchasing multiple small mechanical components separately. It also helps purchasing teams, technicians, distributors, and service companies maintain accurate spare-parts records.

The complete E2282-725-0A0 reference helps purchasing personnel distinguish this XR pusher assembly from similar mechanical components.

The product description clearly identifies the assembly as PUSHER XR ASM., reducing confusion with the related XL-designated assembly.

Factories can prepare the assembly for emergency repair, scheduled replacement, machine relocation, or equipment refurbishment.

The product can be verified through part number, machine model, installation photographs, machine nameplate, and removed-part appearance before shipment.

Pre-order confirmation helps reduce purchasing errors caused by incomplete model information, similar-looking components, machine revisions, or unclear installation positions.

Packing can be arranged according to product condition, order quantity, destination, and transportation method to reduce movement and impact during delivery.

E2281-725-0A0 and E2282-725-0A0 belong to related pusher configurations, but they should not be treated as automatically interchangeable.

The buyer should confirm:

The assembly is used in electronics manufacturing facilities operating compatible JUKI FX-1R placement equipment. It can be prepared as a replacement part for production-line maintenance.

Contract manufacturers operating several SMT lines can use the part number to organize machine-specific maintenance inventory and reduce confusion between similar components.

SMT equipment repair providers can source the E2282-725-0A0 assembly for customer machine servicing, mechanical troubleshooting, and scheduled maintenance.

Equipment refurbishers may replace damaged or worn assemblies before machine testing, resale, installation, or final customer acceptance.

Distributors can quote the product to customers requiring a clearly identified FX-1R mechanical assembly and combine it with other SMT spare parts.

Maintenance departments can keep the assembly as a critical spare to reduce waiting time after unexpected mechanical failure.

The E2282-725-0A0 pusher assembly operates as part of a coordinated mechanical mechanism. The exact operating sequence depends on the machine configuration and related control system.

A general working sequence is shown below:

Stable operation depends on more than the pusher assembly itself. Technicians should also inspect the cylinder, shaft, stopper, bracket, screws, washers, sensors, mounting surfaces, alignment, control signals, and nearby moving components.

The required part number should be:

E2282-725-0A0

Check every letter, number, and hyphen. A similar number may refer only to a bracket or individual component rather than the complete assembly.

The required description should be:

PUSHER XR ASM.

Do not confuse this product with the related PUSHER XL ASM.

Provide the complete machine model and nameplate information. The intended application is the JUKI FX-1R pick and place machine.

Provide clear photographs showing the installation position, surrounding components, bracket shape, and mounting points.

The removed assembly should be compared with the offered product. Important comparison points include:

State the accepted supply condition in the inquiry:

• New stock
• Original used stock
• Tested refurbished stock
• Compatible replacement stock
• Any available condition subject to approval

The final condition should be clearly stated in the quotation.

For a faster quotation, include the required quantity, destination country, preferred transportation method, and expected delivery schedule.

Installation should be completed by trained SMT equipment maintenance personnel.

A general replacement process may include:

1. Stop the machine according to factory safety procedures.
2. Disconnect the required electrical and pneumatic supplies.
3. Release stored mechanical or pneumatic energy where applicable.
4. Photograph the original assembly and surrounding installation area.
5. Mark the movement direction and connected component positions.
6. Remove the existing assembly carefully.
7. Inspect the bracket, shaft, stopper, cylinder, screws, washers, and mounting surface.
8. Compare the replacement assembly with the removed component.
9. Confirm the XR configuration and mounting orientation.
10. Install the assembly using the correct fastening components.
11. Check alignment and free mechanical movement.
12. Restore the necessary machine connections.
13. Test the mechanism in maintenance or low-speed mode.
14. Observe movement, stopping position, noise, vibration, and return action.
15. Record the replacement in the machine maintenance history.

The exact maintenance procedure should follow the applicable machine documentation and factory safety regulations.

Before shipment, inspection can be arranged according to product condition and order requirements.

Protective packing helps reduce vibration, impact, contamination, and moisture exposure during international delivery.

E2282-725-0A0 is identified as the PUSHER XR ASM. for the applicable machine configuration. Final compatibility should be confirmed using the machine model, installation position, part-number reference, and existing assembly photographs.

E2282-725-0A0 is the XR pusher assembly, while E2281-725-0A0 is the XL pusher assembly. They belong to related configurations but should not be interchanged without confirming the machine position and bracket structure.

No. E2282-725-0A0 identifies the complete XR pusher assembly. E2282-725-000 may identify an individual XR bracket component. Confirm whether the maintenance requirement is for the complete assembly or a separate part.

Please provide the part number, machine model, required quantity, accepted product condition, destination country, delivery requirement, machine nameplate photograph, removed-part photographs, and any additional SMT spare-parts list.

Yes. The E2282-725-0A0 assembly can be quoted together with other requested SMT parts. Combined purchasing may simplify communication, inspection, packing, transportation, and factory maintenance inventory preparation.

Looking for the JUKI E2282-725-0A0 PUSHER XR ASM. for your FX-1R SMT pick and place machine?

Please send the following information:

• Required part number
• Machine model
• Required quantity
• Preferred product condition
• Existing part photographs
• Installation-position photographs
• Machine nameplate photograph
• Destination country
• Required delivery time
• Additional SMT spare-parts list

Our sales team will review the information, confirm the requested configuration, prepare product photographs when available, and provide a suitable quotation for factory maintenance, equipment repair, spare-parts distribution, or machine refurbishment.

Send your inquiry today for availability, condition confirmation, packing details, and delivery options.

JUKI and FX-1R are used only to identify product compatibility and equipment application. All trademarks and machine names belong to their respective owners. Product condition, configuration, included components, compatibility, and delivery terms should be confirmed in the formal quotation before ordering.