Panasonic N210098763AB Precision Steel Clamp Arm for CM602 and NPM Holder with Mechanical Engagement

Panasonic N210098763AB Steel Clamp Arm for CM602 NPM Holder

The Panasonic N210098763AB Steel Clamp Arm is a precision mechanical spare part commonly listed for CM602 and NPM SMT placement-machine holder assemblies. It is also described in parts catalogues as an “ARM, STEEL,” “Clamp Arm,” or “Holder 12 Clamp Arm.” Its primary purpose is to provide controlled mechanical engagement within the applicable nozzle-holder or placement-head mechanism.

During high-volume electronics production, placement-head components complete thousands of operating movements. Repeated movement, contamination, mechanical impact, incorrect installation, or wear in surrounding parts may affect the clamp arm’s movement and engagement. Replacing a bent, worn, cracked, or damaged arm can help restore the mechanical operation of the holder assembly after the complete head mechanism has been inspected.

For accurate ordering, customers should provide the full part number N210098763AB, machine model, placement-head specification, required quantity, and photographs of the existing component. CM602 and NPM are the most consistently listed applications, but compatibility must be checked against the installed holder assembly and machine parts list before purchase.

The N210098763AB reference is consistently identified in independent SMT parts listings as a steel clamp arm associated with CM602 and NPM holder applications.

The arm uses a compact steel structure suitable for repeated mechanical movement inside the compatible holder mechanism. Its rigid form helps maintain the required engagement geometry when the component is installed correctly.

The complete part number N210098763AB allows maintenance teams to distinguish this component from visually similar arms used in other heads, holders, or machine generations.

This part is associated with the mechanical clamping section of the applicable nozzle-holder or placement-head assembly rather than with the feeder, servo driver, control board, valve, or sensor system.

The clamp arm can be stocked as part of an SMT maintenance inventory for equipment repair, planned servicing, and emergency replacement.

The product is compact and can be packed individually or consolidated with other SMT machine parts, helping overseas factories reduce separate shipment costs.

Customers can submit machine information and old-part photographs before ordering. This helps identify possible differences in head configuration, holder position, revision suffix, and component dimensions.

The clamp arm works as part of a moving mechanical assembly. It may require replacement when inspection reveals physical damage, excessive wear, poor movement, or incorrect engagement.

Repeated clamping and releasing cycles can gradually wear the arm’s contact area, pivot section, mounting surface, or retaining edge.

The rate of wear may depend on:

• Daily production hours
• Placement-head cycle frequency
• Machine maintenance quality
• Cleanliness of the holder assembly
• Condition of the related spring
• Holder alignment
• Previous component collisions
• Lubrication practices where applicable

A worn contact area may change how the arm engages the related holder component.

A nozzle collision, dropped head assembly, forced manual movement, incorrect tool use, or foreign material inside the mechanism may bend or damage the arm.

Even minor deformation can cause:

• Restricted movement
• Uneven contact
• Incorrect holder engagement
• Mechanical interference
• Unusual operating noise
• Repeated holder alarms
• Accelerated wear of surrounding parts

A visibly bent arm should not be straightened and reused without proper technical evaluation.

Dust, grease residue, adhesive material, broken component fragments, or other contamination can collect around the moving mechanism.

Contamination may:

• Increase friction
• Restrict the arm’s travel
• Prevent full engagement
• Damage contact surfaces
• Create uneven movement
• Affect the spring return action

Cleaning should be completed according to the machine maintenance procedure.

The steel arm may operate together with a spring or another return mechanism. A weak, broken, missing, or incorrectly installed spring can cause abnormal arm movement.

Replacing only the arm may not solve the problem when the spring is damaged.

A damaged holder, shaft, pivot pin, bushing, mounting screw, or contact block may place abnormal force on the clamp arm.

The entire mechanical assembly should be inspected before installing the replacement.

The arm may fail prematurely when installed:

• In the wrong direction
• In an incorrect holder position
• With the wrong fastener
• With an unsuitable spring
• Under excessive tightening force
• Without adequate clearance
• With contamination trapped underneath
• With mismatched surrounding components

Photographing the original assembly before disassembly can reduce installation mistakes.

These symptoms may also be caused by other parts in the placement-head assembly. A complete mechanical inspection is recommended before deciding which component must be replaced.

Installing the correctly matched N210098763AB clamp arm provides a practical repair solution when the existing arm is confirmed to be worn, damaged, deformed, or missing.

The replacement arm must match the required:

• Overall shape
• Material thickness
• Pivot-hole size
• Contact profile
• Mounting orientation
• Holder position
• Spring engagement point
• Head configuration

A similar appearance alone does not confirm interchangeability.

The full code should be written as:

N210098763AB

The final suffix is important. Buyers should not order only by descriptions such as “NPM arm,” “CM602 clamp,” or “holder arm.”

The part can be used for:

• Corrective machine maintenance
• Preventive placement-head servicing
• Nozzle-holder mechanism repair
• Used machine refurbishment
• Production-line spare-parts preparation
• Replacement of damaged mechanical components
• Maintenance stock for overseas factories
• Equipment service-company inventories

Providing the old-part photograph and machine information allows the supplier to compare the visible structure before shipment.

Recommended photographs include:

N210098763AB is most consistently listed as a clamp arm for CM602 and NPM equipment. One broader parts reference also associates the code with NPM-TT2, NPM-W2, CM402, CM212, and DT401 configurations. Because this broader model list is not consistent across every catalogue, buyers should treat it only as a verification reference rather than proof of universal compatibility.

Panasonic’s official product information describes NPM equipment as modular placement machinery using different placement-head configurations. This is one reason the exact machine series alone may not be sufficient for spare-part selection.

N210098763AA and N210007284AB appear beside N210098763AB in some SMT spare-parts listings, but those references should not be presented as guaranteed replacements. The suffix, profile, head configuration, and installation position must be checked separately.

The arm is commonly marketed for CM602 holder applications. It can be used when the installed arm is confirmed as N210098763AB and requires replacement due to wear or physical damage.

The part is also commonly listed for NPM placement equipment. The exact NPM machine and head configuration should be included in the inquiry because different NPM models can use different placement heads and mechanical assemblies.

N210098763AB can be considered when inspection confirms a damaged arm within the relevant nozzle-holder or clamp-holder mechanism.

The following parts should be checked at the same time:

• Holder body
• Return spring
• Pivot pin
• Mounting screw
• Shaft or bushing
• Contact surface
• Nozzle assembly
• Pneumatic connections around the head
• Sensors related to holder positioning
• Mechanical stops

Factories operating compatible machines can keep verified clamp arms in maintenance stock.

A practical stock plan may include:

SMT equipment service companies may use the arm when rebuilding compatible heads or preparing used machines for resale.

Before completing the refurbishment, technicians should verify:

• Free mechanical movement
• Correct arm orientation
• Holder engagement
• Spring return action
• Head calibration
• Nozzle operation
• Machine alarm status
• Trial placement results

This clamp arm can support maintenance activities in:

• Electronics manufacturing service factories
• Automotive electronics facilities
• Consumer electronics plants
• Industrial control manufacturers
• Communication equipment factories
• LED assembly companies
• Power electronics production lines
• Appliance control-board factories
• Medical electronics manufacturing
• SMT equipment repair centers
• Spare-parts distribution businesses
• Used equipment refurbishment companies

N210098763AB is a passive mechanical component. It does not generate electrical, pneumatic, or motor-driven movement by itself.

The arm remains in its specified position within the holder assembly. Its resting position may be maintained by a spring, pivot structure, holder geometry, or another mechanical component.

During the machine operating sequence, force is transferred through the relevant placement-head mechanism.

Depending on the exact head design, this force may cause the arm to:

• Rotate
• Shift
• Open
• Close
• Retain
• Release
• Contact the holder
• Return to its original position

The arm’s contact surface engages the matching holder component. Correct dimensions and alignment allow the mechanism to maintain the required mechanical relationship.

When the operating force is removed or reversed, the arm moves away from the engagement position.

A spring or related component may help return it to its normal position.

The movement repeats during production. Reliable operation depends on:

• Correct arm geometry
• Proper installation
• Clean contact surfaces
• Suitable pivot clearance
• Correct spring condition
• Secure fasteners
• Undamaged holder components
• Proper machine adjustment

The exact component arrangement depends on the placement-head model.

The first selection requirement is an exact match with:

N210098763AB

Do not omit the final AB suffix.

Instead of writing only “NPM,” provide the full machine designation.

Examples may include:

• CM602
• Exact NPM series
• NPM-W2
• NPM-TT2
• Other model shown in the equipment BOM

The full model assists with compatibility review but does not replace part-number verification.

Provide the head specification, head identification label, nozzle quantity, or holder assembly code.

The same machine platform may be equipped with more than one head type.

Check the replacement against the removed arm for:

The machine parts catalogue or bill of materials should be treated as the preferred selection reference.

Where possible, provide:

• Machine serial number
• Head serial number
• Assembly code
• Exploded parts diagram
• Existing part number
• Previous purchase record

The customer should review the offered condition before placing the order.

Supply condition must be confirmed in the quotation.

Possible requests may include:

• Original new
• Original used
• Refurbished
• Compatible new

The customer should review the offered condition before placing the order.

State both the immediate repair quantity and the expected spare-stock quantity.

For example:

Send the destination country, postal code, preferred courier, and required delivery date.

This information allows the supplier to calculate:

• Available shipping options
• Estimated freight cost
• Packing requirements
• Estimated transit time
• Consolidated shipment possibilities

Before requesting a quotation, prepare the following information:

Complete information helps reduce delays and incorrect shipments.

The order record and packing label should show the full code N210098763AB.

The arm should be inspected for:

• Visible bending
• Cracks
• Broken edges
• Severe scratching
• Corrosion
• Contamination
• Abnormal repair marks
• Damaged mounting areas

Where a reference sample is available, the supplied arm can be compared with the sample’s profile, thickness, hole position, and contact shape.

The pivot hole, contact section, spring interface, and mounting orientation should be checked for obvious inconsistencies.

The packing quantity should be checked against the purchase order and packing list.

The product should be protected from:

• Impact
• Compression
• Scratching
• Moisture
• Rust
• Mixing with other part numbers
• Loss of small components

Installation should be completed by trained SMT maintenance technicians.

1. Stop the equipment using the approved shutdown procedure.
2. Isolate electrical and pneumatic energy where required.
3. Move the placement head to a safe maintenance position.
4. Record the current holder structure before disassembly.
5. Take photographs of the arm, spring, holder, and fastener positions.
6. Remove the existing arm with suitable tools.
7. Inspect the removed arm for wear, cracks, or bending.
8. Check the holder, pivot pin, spring, screws, and surrounding components.
9. Clean the mounting area carefully.
10. Compare the new arm with the removed component.
11. Confirm the correct mounting direction.
12. Install the arm without applying excessive force.
13. Reinstall the spring and related components correctly.
14. Check that the mechanism moves freely.
15. Complete machine calibration where required.
16. Run the machine in maintenance or test mode.
17. Confirm that no related alarm remains.
18. Perform a controlled production test.
19. Reinspect the assembly after the test cycle.
20. Record the replacement in the maintenance log.

Always follow the approved maintenance manual and workplace safety procedure for the specific machine.

Clean the mechanism according to the maintenance schedule. Do not use unsuitable chemicals or abrasive tools on precision surfaces.

Check for:

• Bent structure
• Cracks
• Loose mounting
• Uneven wear
• Corrosion
• Restricted movement
• Abnormal contact marks

The arm may appear damaged because the related spring is weak, broken, or incorrectly installed.

Do not force the holder beyond its normal travel range. Excessive force may damage the arm, holder, spring, or pivot section.

A useful record should contain:

• Machine number
• Machine serial number
• Head model
• Failure date
• Observed symptom
• Removed part number
• Installed part number
• Technician name
• Test result
• Follow-up inspection date

Keep spare parts:

• In individual labeled bags
• In a dry environment
• Away from corrosive materials
• Protected from impact
• Separated by part number
• Inside a closed spare-parts cabinet

Freight cost, delivery time, and shipping availability are confirmed according to the destination, package weight, order quantity, and selected service.

We focus on spare parts for electronic assembly and SMT production equipment.

Customers can provide the part number, machine model, and product photographs before ordering.

N210098763AB can be packed with other required items, including:

• SMT nozzles
• Feeder parts
• Filters
• Sensors
• Valves
• Motors
• Drivers
• Control boards
• Belts
• Cables
• Holders
• Springs
• Bearings
• Mechanical machine parts

We support inquiries from Europe, North America, Southeast Asia, and other overseas markets.

The quotation can specify:

• Offered condition
• Part number
• Quantity
• Unit price
• Lead time
• Packing method
• Shipping option
• Payment terms
• Warranty conditions

Small mechanical components are labeled and protected to reduce damage or mixing during international transportation.

N210098763AB is a steel mechanical clamp arm commonly listed for compatible CM602 and NPM placement-machine holder assemblies. It supports the clamping or retaining movement of the related mechanical mechanism.

No universal compatibility should be assumed. NPM machines can use different placement heads and holder configurations. Please provide the exact machine model, head specification, equipment BOM, and old-part photographs before ordering.

Direct interchangeability should not be assumed. Although both references appear in related parts listings, the suffix, dimensions, profile, holder position, and equipment configuration must be checked before replacement.

Please provide N210098763AB, required quantity, machine model, head type, preferred supply condition, destination country, postal code, and clear photographs of the existing component and installation position.

Yes. Please send the part numbers and quantities of the required nozzles, holders, springs, filters, valves, sensors, belts, motors, drivers, feeder parts, or control boards for consolidated checking and packing.

Please send the full part number, quantity, machine model, placement-head information, destination, and product photographs for an accurate quotation.

SMT PARTS SUPPLY LTD

Contact Person: Tomas Tang
Department: Sales Department
Telephone: +86 13861307079
Email: tomas@smtmachine-parts.com
Address: D-D526, Haye TechnoPark, No. 93 Weihe Road, Industrial Park District, Suzhou, Jiangsu, 215127, China

We welcome inquiries from SMT factories, electronics manufacturers, maintenance companies, equipment refurbishers, and spare-parts distributors.

Panasonic and all referenced equipment model names are used only to explain the intended application and assist with spare-part identification. All trademarks belong to their respective owners. Product availability, condition, compatibility, warranty, and delivery terms are subject to the final quotation.