Blog Details

Home Blog

JUKI RF Series Electric Tape Feeder Technical Support Guide

2026-03-19

JUKI RF Series Electric Tape Feeder Technical Support Guide

Dedicated support page for RF08AS, RF12AS, RF16AS, RF24AS, RF32AS, RF44AS and RF56AS. Prepared for international customers, maintenance teams, distributors and SMT production engineers who need a clear and practical reference for specifications, setup, operation and service support.

Send Inquiry Contact on WhatsApp

7 ModelsRF08AS / RF12AS / RF16AS / RF24AS / RF32AS / RF44AS / RF56AS

DC24VPower supply for feeder operation

Multi Pitch2 mm to 24 mm feed pitch range depending on model

Page Title Suggestion

Recommended Webpage Title

JUKI RF Series Electric Tape Feeder Technical Support Guide

Suitable for product detail pages, support centers, and SEO-oriented technical content pages.

Quick Contact

Contact Our Sales & Support Team

Contact: Tomas Tang

Department: Sales Department

Email: tomas@smtmachine-parts.com

WhatsApp / Tel: +86 13861307079

Website: www.smtmachine-parts.com

1. Product Overview

The JUKI RF Series Electric Tape Feeder is designed for stable, accurate and repeatable tape feeding in SMT pick-and-place production. It supports multiple tape widths and package formats while maintaining consistent tape transport, controlled cover tape peeling and reliable component presentation at the pick-up position.

This feeder family covers RF08AS, RF12AS, RF16AS, RF24AS, RF32AS, RF44AS and RF56AS. Different models are intended for different tape widths, feed pitches and application ranges, allowing end users to match feeder choice with actual production requirements.

For customers using JUKI placement equipment, the RF series is a practical solution for long-running production, changeover-intensive lines, technical support documentation, feeder replacement projects and spare parts sourcing.

2. Supported Models

RF08AS
RF12AS
RF16AS
RF24AS
RF32AS
RF44AS
RF56AS

3. Software / Version Note

Correct machine software compatibility must be confirmed before use. Improper version matching or incorrect setup may damage the feeder or affect machine operation.

Manual examples include Ver.10.20A or later and Ver.8.10A or later.
Users should confirm feeder compatibility with the actual JUKI mounting platform before installation.

4. Main Construction and Functional Parts

Based on the parts illustration in the manual, the RF feeder consists of the feeding mechanism, upper cover section, carrier tape guidance path, peel plate area, reel holder section, pull gear drive section, operation panel and cover tape handling area.

Main Parts

Lock release
Upper cover hook
Carrier guide
Reel holder
Pull gear
Tension arm
Guide roller
Operation panel
Feeding mechanism

Support Parts

Connector / power cable area
Peel plate
Reference line and setting marks
Upper cover
Upper pusher plate
Spring
Cover tape chamber area
Tape insertion slot

5. Key Technical Specifications

Item	Technical Data
Product series	RF08AS / RF12AS / RF16AS / RF24AS / RF32AS / RF44AS / RF56AS
Feeder type	Electric Tape Feeder
Outside dimensions	Approx. 560 mm length; width varies according to model size
Power supply	DC24V, DC5V as shown in the specification table
Tape width coverage	8 mm / 12 mm / 16 mm / 24 mm / 32 mm / 44 mm / 56 mm depending on model
Feed pitch range	2 mm, 4 mm, 8 mm, 12 mm, 16 mm, 20 mm, 24 mm depending on feeder model
Operating environment	Approx. 10°C to 40°C, 20% to 80% RH, non-condensing
Application	SMT taped components for JUKI pick-and-place production lines

Exact dimensions, weight and pitch compatibility differ by model. Final selection should match component packaging and machine configuration.

6. Model Width and Weight Reference

Model	Typical Tape Width	Approx. Mass
RF08AS	8 mm class	Approx. 1.3 kg
RF12AS	12 mm class	Approx. 1.6 kg
RF16AS	16 mm class	Approx. 1.8 kg
RF24AS	24 mm class	Approx. 3.0 kg
RF32AS	32 mm class	Approx. 3.0 kg
RF44AS	44 mm class	Approx. 3.4 kg
RF56AS	56 mm class	Approx. 3.4 kg

7. Applicable Feed Pitch by Model

Model	Applicable Feed Pitch
RF08AS	2 mm, 4 mm
RF12AS	4 mm, 8 mm, 12 mm
RF16AS	4 mm, 8 mm, 12 mm, 16 mm
RF24AS	4 mm, 8 mm, 12 mm, 16 mm, 20 mm, 24 mm
RF32AS / RF44AS / RF56AS	Larger pitch settings according to feeder structure and tape format

8. Application Scope

The RF series is intended for taped SMT components supplied on embossed or paper carrier tapes. It is suitable for production lines where precise pick-up position, stable tape feeding and correct cover tape handling are required.

Common applications include EMS production, consumer electronics assembly, industrial control boards, automotive electronics subassemblies and mixed-model contract manufacturing.

9. Upper Cover Replacement and Configuration

The manual includes a dedicated procedure for replacing the upper cover according to component size and feed pitch. This is an important adjustment point for maintaining stable tape transport and correct feeding behavior.

Operation Point	Details
Disassembly	Loosen the screw and remove the upper pusher plate and spring carefully.
Cover removal	Raise the upper cover hook and remove the upper cover.
Grease application	Apply Alvania EP-2 grease to the U-groove using a cotton swab. Do not apply grease to the upper surface of the frame.
Reassembly	Install the suitable upper cover in reverse order and tighten the screw to 0.29 N·m.

10. Peel Plate Positioning

Correct peel plate positioning is one of the most important setup points in the RF series. The peel plate position must match the selected feed pitch to maintain correct component supply location.

RF12AS / RF16AS / RF24AS

Loosen the peel plate fixing screws.
Set the front end of the peel plate to the reference line.
Adjustment is made within about 0.3 mm of groove width.
Tighten the screws with a torque of approximately 0.096 to 0.11 N·m.

RF32AS / RF44AS / RF56AS

Loosen the peel plate screws.
Adjust the distance from the peel plate front end to the component supply position mark.
Specified dimension = feed pitch ÷ 2 + 0.5 mm.
Tighten the screws after the setting is confirmed.

Feed Pitch	Specified Dimension
56 mm	28.5 mm
52 mm	26.5 mm
48 mm	24.5 mm
44 mm	22.5 mm
40 mm	20.5 mm
36 mm	18.5 mm
32 mm	16.5 mm
28 mm	14.5 mm
24 mm	12.5 mm
20 mm	10.5 mm
16 mm	8.5 mm
12 mm	6.5 mm
8 mm	4.5 mm
4 mm	2.5 mm

Feed pitch setting and peel plate position must match.

11. Tape Loading Procedure

Set the tape reel on the reel holder of the feeder or feeder stand.
Insert the carrier tape into the tape feeder path on the slide rail.
Align the carrier tape feeding holes with the teeth of the pull gear.
Pass the cover tape through the specified tape path.
Lead the cover tape over the guide roller and under the tension-related roller path as instructed.
Push the pull idler arm to insert the cover tape into the pull gear area.
Press the operation button so the pull gear rotates and moves the tape forward.
Confirm that the tape reaches the correct supply location.
Cut and secure the extra tape end according to the operating method.

12. Tape Removal Procedure

Press the idler arm to prepare for tape release.
Pull out the cover tape from the pull gear by about 20 mm and cut it with scissors.
Hold the upper cover hook and open the upper cover.
Remove the cover tape from the guide path.
Remove the tape from the tape insertion slot.

13. Cover Tape Disposal

Close the chamber cover if it is open, especially during production continuation or splicing work.
When chamber level is correct, keep the cover properly closed.
When discarding cover tape during production, cut the tape with scissors while observing the chamber handling instruction.

Pulling the cover tape too strongly may shift the component supply position. Careful handling is recommended.

14. Operation Panel

The operation panel is used for feed control and setup verification. The buttons allow the operator to advance tape by one pitch, by multiple pitches, or repeat feed-related actions depending on the selected operating mode.

Button Function	Operation Summary
Feed by one pitch	Used for fine setup and pick-up position checking.
Feed by two pitches	Used for motion verification and feeding confirmation.
Continuous / long-press operation	Enables repeated action after holding the button for a short period.
Return / reset type action	Returns operation to an initial or feeder-defined state.

15. Safety Notes

Use the feeder only after confirming correct machine and software compatibility.
Do not touch moving parts during operation.
Some parts may become hot after extended operation.
Confirm that the feeder is mounted and locked correctly before use.
Incorrect handling can damage both the feeder and the machine.

16. Maintenance Guidance

Keep the tape path clean and free from dust or debris.
Inspect pull gear, guide rollers and tension-related parts regularly.
Use the specified grease only at the designated area.
Check fastening torque during maintenance or part replacement.
Reconfirm upper cover and peel plate settings whenever feed performance changes.

17. Trade-Focused Value Summary

Wide model coverage for multiple SMT feeder width requirements
Stable electric feeding for repeatable production performance
Practical mechanical adjustment points for technical support teams
Service-friendly structure for maintenance and parts replacement
Suitable for spare parts sales, feeder repair support and refurbishment projects

Need Quote or Technical Confirmation?

Contact our team for feeder availability, spare parts support, compatible alternatives, repair consultation or RF series technical details for your SMT production line.

Email: tomas@smtmachine-parts.com

WhatsApp: +86 13861307079

Website: www.smtmachine-parts.com

18. Recommended SEO Keywords

JUKI RF feeder electric tape feeder JUKI SMT feeder RF08AS feeder RF12AS feeder RF16AS feeder RF24AS feeder RF32AS feeder RF44AS feeder RF56AS feeder SMT fe

Blog Details

Home Blog

JUKI RF Series Electric Tape Feeder Technical Support Guide

Send Inquiry Contact on WhatsApp

7 ModelsRF08AS / RF12AS / RF16AS / RF24AS / RF32AS / RF44AS / RF56AS

DC24VPower supply for feeder operation

Multi Pitch2 mm to 24 mm feed pitch range depending on model

Page Title Suggestion

Recommended Webpage Title

JUKI RF Series Electric Tape Feeder Technical Support Guide

Suitable for product detail pages, support centers, and SEO-oriented technical content pages.

Quick Contact

Contact Our Sales & Support Team

Contact: Tomas Tang

Department: Sales Department

Email: tomas@smtmachine-parts.com

WhatsApp / Tel: +86 13861307079

Website: www.smtmachine-parts.com

1. Product Overview

2. Supported Models

RF08AS
RF12AS
RF16AS
RF24AS
RF32AS
RF44AS
RF56AS

3. Software / Version Note

Correct machine software compatibility must be confirmed before use. Improper version matching or incorrect setup may damage the feeder or affect machine operation.

Manual examples include Ver.10.20A or later and Ver.8.10A or later.
Users should confirm feeder compatibility with the actual JUKI mounting platform before installation.

4. Main Construction and Functional Parts

Main Parts

Lock release
Upper cover hook
Carrier guide
Reel holder
Pull gear
Tension arm
Guide roller
Operation panel
Feeding mechanism

Support Parts

Connector / power cable area
Peel plate
Reference line and setting marks
Upper cover
Upper pusher plate
Spring
Cover tape chamber area
Tape insertion slot

5. Key Technical Specifications

Item	Technical Data
Product series	RF08AS / RF12AS / RF16AS / RF24AS / RF32AS / RF44AS / RF56AS
Feeder type	Electric Tape Feeder
Outside dimensions	Approx. 560 mm length; width varies according to model size
Power supply	DC24V, DC5V as shown in the specification table
Tape width coverage	8 mm / 12 mm / 16 mm / 24 mm / 32 mm / 44 mm / 56 mm depending on model
Feed pitch range	2 mm, 4 mm, 8 mm, 12 mm, 16 mm, 20 mm, 24 mm depending on feeder model
Operating environment	Approx. 10°C to 40°C, 20% to 80% RH, non-condensing
Application	SMT taped components for JUKI pick-and-place production lines

Exact dimensions, weight and pitch compatibility differ by model. Final selection should match component packaging and machine configuration.

6. Model Width and Weight Reference

Model	Typical Tape Width	Approx. Mass
RF08AS	8 mm class	Approx. 1.3 kg
RF12AS	12 mm class	Approx. 1.6 kg
RF16AS	16 mm class	Approx. 1.8 kg
RF24AS	24 mm class	Approx. 3.0 kg
RF32AS	32 mm class	Approx. 3.0 kg
RF44AS	44 mm class	Approx. 3.4 kg
RF56AS	56 mm class	Approx. 3.4 kg

7. Applicable Feed Pitch by Model

Model	Applicable Feed Pitch
RF08AS	2 mm, 4 mm
RF12AS	4 mm, 8 mm, 12 mm
RF16AS	4 mm, 8 mm, 12 mm, 16 mm
RF24AS	4 mm, 8 mm, 12 mm, 16 mm, 20 mm, 24 mm
RF32AS / RF44AS / RF56AS	Larger pitch settings according to feeder structure and tape format

8. Application Scope

Common applications include EMS production, consumer electronics assembly, industrial control boards, automotive electronics subassemblies and mixed-model contract manufacturing.

9. Upper Cover Replacement and Configuration

Operation Point	Details
Disassembly	Loosen the screw and remove the upper pusher plate and spring carefully.
Cover removal	Raise the upper cover hook and remove the upper cover.
Grease application	Apply Alvania EP-2 grease to the U-groove using a cotton swab. Do not apply grease to the upper surface of the frame.
Reassembly	Install the suitable upper cover in reverse order and tighten the screw to 0.29 N·m.

10. Peel Plate Positioning

Correct peel plate positioning is one of the most important setup points in the RF series. The peel plate position must match the selected feed pitch to maintain correct component supply location.

RF12AS / RF16AS / RF24AS

Loosen the peel plate fixing screws.
Set the front end of the peel plate to the reference line.
Adjustment is made within about 0.3 mm of groove width.
Tighten the screws with a torque of approximately 0.096 to 0.11 N·m.

RF32AS / RF44AS / RF56AS

Loosen the peel plate screws.
Adjust the distance from the peel plate front end to the component supply position mark.
Specified dimension = feed pitch ÷ 2 + 0.5 mm.
Tighten the screws after the setting is confirmed.

Feed Pitch	Specified Dimension
56 mm	28.5 mm
52 mm	26.5 mm
48 mm	24.5 mm
44 mm	22.5 mm
40 mm	20.5 mm
36 mm	18.5 mm
32 mm	16.5 mm
28 mm	14.5 mm
24 mm	12.5 mm
20 mm	10.5 mm
16 mm	8.5 mm
12 mm	6.5 mm
8 mm	4.5 mm
4 mm	2.5 mm

Feed pitch setting and peel plate position must match.

11. Tape Loading Procedure

Set the tape reel on the reel holder of the feeder or feeder stand.
Insert the carrier tape into the tape feeder path on the slide rail.
Align the carrier tape feeding holes with the teeth of the pull gear.
Pass the cover tape through the specified tape path.
Lead the cover tape over the guide roller and under the tension-related roller path as instructed.
Push the pull idler arm to insert the cover tape into the pull gear area.
Press the operation button so the pull gear rotates and moves the tape forward.
Confirm that the tape reaches the correct supply location.
Cut and secure the extra tape end according to the operating method.

12. Tape Removal Procedure

Press the idler arm to prepare for tape release.
Pull out the cover tape from the pull gear by about 20 mm and cut it with scissors.
Hold the upper cover hook and open the upper cover.
Remove the cover tape from the guide path.
Remove the tape from the tape insertion slot.

13. Cover Tape Disposal

Close the chamber cover if it is open, especially during production continuation or splicing work.
When chamber level is correct, keep the cover properly closed.
When discarding cover tape during production, cut the tape with scissors while observing the chamber handling instruction.

Pulling the cover tape too strongly may shift the component supply position. Careful handling is recommended.

14. Operation Panel

Button Function	Operation Summary
Feed by one pitch	Used for fine setup and pick-up position checking.
Feed by two pitches	Used for motion verification and feeding confirmation.
Continuous / long-press operation	Enables repeated action after holding the button for a short period.
Return / reset type action	Returns operation to an initial or feeder-defined state.

15. Safety Notes

Use the feeder only after confirming correct machine and software compatibility.
Do not touch moving parts during operation.
Some parts may become hot after extended operation.
Confirm that the feeder is mounted and locked correctly before use.
Incorrect handling can damage both the feeder and the machine.

16. Maintenance Guidance

Keep the tape path clean and free from dust or debris.
Inspect pull gear, guide rollers and tension-related parts regularly.
Use the specified grease only at the designated area.
Check fastening torque during maintenance or part replacement.
Reconfirm upper cover and peel plate settings whenever feed performance changes.

17. Trade-Focused Value Summary

Wide model coverage for multiple SMT feeder width requirements
Stable electric feeding for repeatable production performance
Practical mechanical adjustment points for technical support teams
Service-friendly structure for maintenance and parts replacement
Suitable for spare parts sales, feeder repair support and refurbishment projects

Need Quote or Technical Confirmation?

Contact our team for feeder availability, spare parts support, compatible alternatives, repair consultation or RF series technical details for your SMT production line.

Email: tomas@smtmachine-parts.com

WhatsApp: +86 13861307079

Website: www.smtmachine-parts.com

18. Recommended SEO Keywords

JUKI RF feeder electric tape feeder JUKI SMT feeder RF08AS feeder RF12AS feeder RF16AS feeder RF24AS feeder RF32AS feeder RF44AS feeder RF56AS feeder SMT fe

SMT Machine Parts

SMT Spare Parts

SMT Feeder

SMT Nozzle

Servo Motor Driver

SMT Feeder Parts

AI Spare Parts

SMT Conveyor Belt

Screen Printing Machine Parts

Feeder Calibration Jig

Anti Static Products

SMT embly Equipment

SMT Machine Parts

SMT Spare Parts

SMT Feeder

SMT Nozzle

Servo Motor Driver

SMT Feeder Parts

AI Spare Parts

SMT Conveyor Belt

Screen Printing Machine Parts

Feeder Calibration Jig

Anti Static Products

SMT embly Equipment

Blog Details

JUKI RF Series Electric Tape Feeder Technical Support Guide

JUKI RF Series Electric Tape Feeder Technical Support Guide

Recommended Webpage Title

Contact Our Sales & Support Team

1. Product Overview

2. Supported Models

3. Software / Version Note

4. Main Construction and Functional Parts

Main Parts

Support Parts

5. Key Technical Specifications

6. Model Width and Weight Reference

7. Applicable Feed Pitch by Model

8. Application Scope

9. Upper Cover Replacement and Configuration

10. Peel Plate Positioning

RF12AS / RF16AS / RF24AS

RF32AS / RF44AS / RF56AS

11. Tape Loading Procedure

12. Tape Removal Procedure

13. Cover Tape Disposal

14. Operation Panel

15. Safety Notes

16. Maintenance Guidance

17. Trade-Focused Value Summary

Need Quote or Technical Confirmation?

18. Recommended SEO Keywords

JUKI RF Series Electric Tape Feeder Technical Support Guide

JUKI RF Series Electric Tape Feeder Technical Support Guide

Recommended Webpage Title

Contact Our Sales & Support Team

1. Product Overview

2. Supported Models

3. Software / Version Note

4. Main Construction and Functional Parts

Main Parts

Support Parts

5. Key Technical Specifications

6. Model Width and Weight Reference

7. Applicable Feed Pitch by Model

8. Application Scope

9. Upper Cover Replacement and Configuration

10. Peel Plate Positioning

RF12AS / RF16AS / RF24AS

RF32AS / RF44AS / RF56AS

11. Tape Loading Procedure

12. Tape Removal Procedure

13. Cover Tape Disposal

14. Operation Panel

15. Safety Notes

16. Maintenance Guidance

17. Trade-Focused Value Summary

Need Quote or Technical Confirmation?

18. Recommended SEO Keywords